Benefits of AIS (Automatic Identification System)
An AIS transponder on your boat automatically receives information broadcast by other AIS-equipped vessel’s and base stations, all while your own vessel’s static and dynamic information is being transmitted. Using with an AIS transponder, you can find AIS mounted small boats and buoys that are difficult to be detected with a marine radar. The MA-510TR can receive both Class A and B AIS signals and increases your safety at sea.
4.3-inch Colour TFT LCD
Plotter screen (Day mode)
The wide viewing, high resolution 4.3-inch colour TFT display clearly shows your and other vessels’ positions. Potentially dangerous vessels are shown in red and ships registered as your friends are shown in yellow. The day-mode display is readable in direct sunlight, and the night-mode display ensures good readability in the dark for further convenience.
AIS Target List and Details
Target list screen
The ‘Target’ list screen shows all detected AIS equipped vessels and targets. The ‘Danger’ list screen shows a list of vessels that are within six nautical miles of Closest Point of Approach (CPA) and sixty minutes of Time to Closest Point of Approach (TCPA) from your vessel. The ‘Friend’ list screen displays the detected AIS targets that you set as friends. When you want to see target details, select the target by the cursor keys and push [ENT] key.
Detail screen examples
Simplified Navigation Function
Plotter screen with Navigation screen
The Navigation function guides you to a specified waypoint or AIS target. You can assign a maximum of 100 favourite fishing spots or destinations as waypoints. The Navigation function is simply started by just selecting a waypoint or an AIS target on the display.
Navigation screen
Navigation to MOB Waypoint
Plotter screen with MOB Navigation screen
When the [WPT/MOB] button is held down, the MA-510TR automatically marks a waypoint of the vessel’s current position and activates the MOB (Man Overboard) navigation function to the location the MOB event occurred.
MOB Navigation screen
Individual DSC Call
You can transmit an individual DSC Call by simply selecting an AIS target and the voice channel on the MA-510TR*.
* A compatible Icom VHF radio is required. The MA-510TR and a radio can be connected with the accessory cable. See the instruction manual of each for radio’s connecting instructions.
USB Connectivity
AIS data can be output from an USB cable connector on the rear panel*.
* A third party application and a connection cable are required.
Supplied GPS Antenna
Supplied GPS antenna
The GPS receiver with SBAS function is integrated in the MA-510TR. Position information can be simply received with connection to the supplied GPS antenna with 10 m, 32.8 ft cable.
NMEA 2000™ & NMEA 0183 Connectivity
With the plug-and-play functionality of NMEA 2000™, the MA-510TR can connect to a NMEA 2000™ network (an external plotter, marine radar and VHF radio). Using NMEA 0183/-HS connectivity, the transponder can connect to a transceiver, plotter device, marine radar or GPS receiver.
Collision Alarm Function
When a vessel comes into the CPA or TCPA range, the vessel’s icon blinks on the plotter display and a beep sound is heard. When connected to external audio equipment installed on the chart table or fly bridge, the collision alarm function will alert you, even when you are away from the AIS transponder.
Silent Mode for Security and Privacy
Silent mode switches off the AIS transmitter and allows you to temporarily stop transmitting your vessel’s position information. This function is useful when you do not want to reveal your fishing spots to other vessels. You can receive other vessel’s AIS reports also while the silent mode is ON.
Other Features
- Compatible with both 12 V and 24 V power sources
- Multi-lingual user interface (English, French, Indonesian, Spanish and Vietnamese)
- Anchor watch function sounds an alarm when your vessel is at anchor but has drifted
- IPX7 waterproof protection (up to 1 m depth of water for 30 minutes; except connectors)
General
| Operating frequencies |
161.500 MHz to 162.025 MHz |
|
|---|---|---|
| Type of emission |
16K0GXW (GMSK) |
|
| Antenna impedance | 50 Ω nominal | |
| Intermediate frequency |
CH-A | 1st: 21.700 MHz, 2nd: 450 kHz |
| CH-B | 1st: 30.150 MHz, 2nd: 450 kHz | |
| Operating temperature range | –20°C to +60°C; –4°F to +140°F |
|
| Power supply requirement | Negative ground: 12 V or 24 V DC nominal (9.6 to 31.2 V) | |
| Current drain (at 12 V DC) | TX: 1.5 A, RX: 0.7 A | |
| Dimensions (approximate)) (Projections not included) |
166.2 (W) × 110.2 (H) × 92.5 (D) mm, 6.5 (W) × 4.3 (H) × 3.6 (D) inch |
|
| Weight (approximate)) | 700 g, 1.5 lb | |
TRANSMITTER
| Output power | 2 W |
|---|---|
| Modulation | 16K0GXW (GMSK) |
| Conducted spurious emission | Less than –36 dBm (9 kHz–1 GHz) Less than –30 dBm (1 GHz–4 GHz) |
RECEIVER (AIS)
| Sensitivity | Less than –110 dBm |
|---|---|
| Adjacent channel selectivity | More than –31 dBm |
| Spurious response | More than –31 dBm |
| Intermodulation | More than –36 dBm |
| Conducted spurious emission | Less than –57 dBm (9 kHz–1 GHz) Less than –47 dBm (1 GHz–4 GHz) |
| Blocking | More than –15 dBm (±0.5 MHz–±5 MHz) More than –23 dBm (±5 MHz–±10 MHz) |
| Co-channel | More than –111 dBm |
RECEIVER (DSC)
| Frequency coverage | 156.525 MHz |
|---|---|
| Type of emission | 16K0G2B |
| Sensitivity | Less than –110 dBm |
| Adjacent channel selectivity | More than 70 dB |
| Spurious response | More than –34 dBm |
| Intermodulation | More than –39 dBm |
| Blocking | More than –20 dBm |
GPS ANTENNA
| Received frequency | 1575.42 MHz |
|---|---|
| Acquisition | 72 ch (maximum) |
| Differential satellites | WAAS, EGNOS, MSAS, GAGAN |
| Dimensions (approximate) | 96.2 × 225 (H) mm, 3.8 × 8.9 (H) inch |
| Weight (approximate) | 700 g, 1.5 lb (including cable and mounting bracket) |
| Cable length (approximate) | 10 m, 32.8 ft |
DATA INTERFACE
| USB (Type-B Mini) | GGA, GNS, GLL, GSA, GSV, RMC, VTG, VDM, VDO, ACA, ACS, ALR, TXT | |
|---|---|---|
| NMEA 2000TM | Input | 059392/904, 060160/416/928, 065240, 126208/996, 129026/029/545 |
| Output | 059392/904, 060416/928, 126208/464/993/996/998, 129026/029/038/039/040/041/539/540/545/792/793/794/797/798/801/802/803/805/806/807/809/810/811 | |
| NMEA 0183 | NMEA Input/Output |
4800–38400 bps Input/Output, sentence format: Output, GGA, GNS, GLL, GSA*1, GSV*1, RMC, VTG, GBS, DTM, DSC |
| External GPS Input | 4800–38400 bps Input, sentence format: GGA, GNS, GLL, RMC, VTG, GBS*2, DTM |
|
| AIS Output | 38400 bps Output, sentence format: VDM, VDO, ACA, ACS, ALR, TXT |
|
*1 Only 38400 bps. *2 When a received GPS signal does not include a GBS sentence, the transponder will not receive the signal from the external GPS receiver.
REAR PANEL VIEW
DIMENSIONS
All stated specifications are subject to change without notice or obligation.
Compatible Icom VHF Radios* with the MA-510TR
IC-M605, IC-M605EURO, IC-M506, IC-M506EURO, IC-M506GE, IC-M424, IC-M424G, IC-M423, IC-M423G, IC-M423GE, IC-M400BB, IC-M400BBE, IC-M330, IC-M330G, IC-M330GE, IC-M324, IC-M324G, IC-M323, IC-M323G
* As of May 2020
Supplied Accessories
- GPS antenna
- DC power cable
- Mounting bracket kit
- Accessory connector
FLUSH MOUNT KITS
SOFTWARE
CS-MA510TR
PROGRAMMING SOFTWARE
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| Marine Products | 20.67MB |
| MA-510TR (LT) | 1.45MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| INSTRUCTION MANUAL | MA-510TR | |
| USB driver Installation guide | MA-510TR |
Firmware / Software
| Type | Model Name | Version | Last Update |
|---|---|---|---|
| USB Driver | MA-510TR | Version 1.00 | Aug.24.2021 |
Close