Icom’s Custom High Power Handling Capacity Speaker for 1500 mW of Powerful Audio
Optional 1500 mW Speaker-Microphone, HM-222HLWP*
* For the transceiver with a "U" mark on the serial number label.
Compact, Waterproof Durable Design (IP67/55/54 and MIL-STD-810-G)
Multiple Operating Modes*
- Analog FM
- NXDN™ /dPMR™ conventional
- NXDN™ Type-D single-site trunking
*Available protocol differs depending on the version.
Over-the-Air Alias (OAA) Function Displays the Caller’s Name without Programming
(IC-F1100DT/DS and IC-F2100DT/DS only)
AquaQuake™ Function Clears Any Water Ingress That May Penetrate the Speaker Grill of the Unit
Motion/Stationary Detection, Man Down and Lone Worker Functions
Operating Time of Up To 18 Hours with the Supplied Battery (BP-280)
IDAS™ Conventional and Type-D Single-Site Trunking
General Features
- 136–174, 350–400, 400–470, 450–512, 450–520 MHz versions
- 128 Channels / 8 Zones (for LCD types)
- 16 Channels (for non-display types)
- Icom’s customized speaker offers a louder 1500 mW audio output
- An engineered casing that amplifies and improves acoustic sound clarity
- Compact (52.2 (W) × 111.8 (H) mm; 2.1 × 4.4 in) and lightweight
- IP67/55/54 waterproof and dust-tight protection
- Tested to 12 categories of MIL-STD-810-G environmental tests
- AquaQuake™ – Expels water ingress from the speaker grill
- DTMF autodial memories
- 16-position rotary selector and ON/OFF volume knob
- Programmable keys – Increase the number of programmable key assignments by using the “Shift key”
- Operating times of up to 18 hours (with the supplied BP-280 battery pack)
- Eight character alphanumeric display (for LCD types)
- Three color LED
Operating Mode*
- NXDN or dPMR Mode 1/Mode 2 conventional
- NXDN or dPMR multi-site conventional over IP network
- NXDN Type-D single-site trunking
- Analog mode
- Analog/digital mixed operation (conventional mode)
(* Available protocol differs depending on the version)
Digital Functions (Voice and Data)
- AMBE+2™ vocoder
- Over-the-Air Alias (OAA) displays the caller’s name without programming (for LCD types)
- Individual, Group and All call
- Late entry for Group call
- Status call and Polling
- Short data messages (for LCD types)
- Call alert (NXDN)
- Radio check (RX only) (NXDN)
- GPS position capabilities (requires HM-171GPW)
- Up to 500 ID numbers for IDAS or MDC 1200 signaling system can be saved in the Call List to show the alias name
Analog Functions
- CTCSS and DTCS tone
- 2-Tone and 5-Tone
- MDC functions*; PTT ID, Emergency (TX/RX), Radio check (RX), Stun (RX), Revive (RX)
- BIIS PTT ID transmission
* Depending on the version
Safety and Security
- Digital voice scrambler* (Low level encryption)
* Voice Scrambler function is not available depending on the transceiver version. - Radio Stun/Revive/Kill (RX only)
- Remote monitor (NXDN)/ambience listening (dPMR)
- Man down, Lone worker and Emergency call key capability
- Motion and Stationary detection function
- Surveillance function temporarily turns OFF the beep and LED indicator
- Power ON password (for LCD types)
Scan Functions
- Priority scan monitors one or two priority channels while scanning non-priority channels
- Voting scan automatically selects the optimal repeater site
- Mode dependent scan automatically changes the scan list, depending on the operating channel
- Power ON scan function
- Talk Back timer
Voice/Audio Functions
- Channel announcement function
- VOX function for hands-free operation
- Siren sound for security alarm
General
IC-F1100DT/S | IC-F1100D | IC-F2100DT/S | IC-F2100D | ||
---|---|---|---|---|---|
Frequency coverage* (*Varies according to version) |
136–174 MHz (NXDN/dPMR) | 400–470 MHz (NXDN/dPMR USA/EUR/EXP) 450–512 MHz (NXDN, USA) 450–520 MHz (NXDN, EXP) |
|||
Number of channels |
128 channels/ 8 zones |
16 channels | 128 channels/ 8 zones | 16 channels | |
Type of emission* (*Depending onversion) |
11K0F3E, 4K00F1E, 4K00F1D (USA) |
||||
16K0F3E, 14K0F3E, 11K0F3E, 8K50F3E, 4K00F1E, 4K00F1D (EXP) |
|||||
16K0F3E, 14K0F3E, 8K50F3E, 4K00F1E, 4K00F1D (EUR) |
|||||
Power supply requirement |
7.5V DC nominal |
||||
Current drain (approx.) |
Tx |
1.3A |
1.6 A (at 5 W) |
||
Rx |
520 mA /110 mA |
520 mA /110 mA |
|||
Antenna impedance |
50Ω |
||||
Operating temperature range (Radio specification) |
–30°C to +60°C; –22°F to +140°F (Radio specification) |
||||
–25°C to +55°C (Radio specification) |
|||||
Dimensions (W × H × D; Projections not included) |
IC-F1100DS/D, IC-F2100DS/D: IC-F1100DT, IC-F2100DT: |
||||
Weight (approx.) |
IC-F1100D, IC-F2100D: 258 g, 9.1 oz (With BP-280 and MB-133) |
Transmitter
IC-F1100DT/S | IC-F1100D | IC-F2100DT/S | IC-F2100D | ||
---|---|---|---|---|---|
Output power (Hi, L2, L1) |
5 W, 2 W, 1 W |
5 W, 2 W, 1 W |
|||
Maximum frequency deviation |
± 5.0 kHz (25 kHz), ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz) |
||||
Spurious emissions |
70 dB minimum (USA/EXP) |
||||
0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR/EXP) |
|||||
Frequency stability |
±2.0ppm |
±1.0ppm |
|||
Audio harmonic distortion |
0.8% typ. (25 kHz), |
0.7% typ. (25 kHz), |
|||
FM Hum and Noise (without CCITT filter) |
46 dB typ. (25 kHz) (EXP), |
44 dB typical (12.5 kHz) (USA) |
|||
Residual modulations (with CCITT filter) |
51 dB typical (25 kHz), |
54 dB typical (25 kHz), |
|||
FSK error |
5% maximum |
||||
External microphone connector |
3-conductor 2.5 (d) mm (1/10 in)/2.2 kΩ |
Receiver
IC-F1100DT/S | IC-F1100D | IC-F2100DT/S | IC-F2100D | ||
---|---|---|---|---|---|
Sensitivity | Analog (at 12dB SINAD) |
0.24 μV typical |
0.24 μV typical |
||
Analog (at 20dB SINAD) |
–5 dBμV typ. emf (25/20 kHz), |
–5 dBμV typ. emf (25/20 kHz), |
|||
Digital (at 5% BER) |
–9 dBμV typical emf |
–8 dBμV typical emf |
|||
Adjacent channel selectivity |
77 dB typ. (25 kHz), |
76 dB typ. (25 kHz), |
|||
Spurious response rejection |
80 dB typical |
||||
Intermodulation rejection | Digital |
71 dB typ. (USA/EXP), |
70 dB typ. (USA/EXP), |
||
Analog |
76 dB typ. (25 kHz, EXP), |
77 dB typ. (25 kHz, EXP), |
|||
Hum and noise | (With CCITT filter) |
48 dB typ. (25 kHz, EXP), |
42 dB typical (12.5 kHz, USA) |
||
(Without CCITT filter) |
51 dB typ. (25 kHz), |
50 dB typ. (25 kHz), |
|||
AF output power (at 5% distortion 8Ω load ) |
Internal SP |
1500 mW typical |
|||
External SP |
450 mW typical (single end ) |
400 mW typical(single end ) |
|||
External speaker connector |
2-conductor 3.5 (d) mm (1⁄8 in)/8 Ω |
All stated specifi cations are subject to change without notice or obligation.
Measurements made in accordance with TIA-603 (USA/EXP) or EN 300-086 (EUR).
* For the transceiver with "U" make on the serial number label.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 G |
|
---|---|---|
Method |
Procedure |
|
Low Pressure |
500.5 |
I, II |
High Temperature |
501.5 |
I, II |
Low Temperature |
502.5 |
I, II |
Temperature Shock |
503.5 |
I-C |
Solar Radiation |
505.5 |
I |
Rain Blowing/Drip |
506.5 |
I, III |
Humidity |
507.5 |
II |
Salt Fog |
509.5 |
– |
Dust Blowing |
510.5 |
I |
Immersion |
512.5 |
I |
Vibration |
514.6 |
I |
Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
Ingress Protection Standard | |
---|---|
Dust & Water |
IP67 (Dust-tight and Immersion) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Battery pack, BP-280
- Belt clip, MB-133
- Antenna
- Desktop charger, BC-213*
- AC adapter*, BC-242 (or BC-123SE/SUK/SV)
* May differ, or not supplied, depending on the version.
MICROPHONES
HEADSETS
PTT/VOX CABLES
CHARGERS
AC ADAPTERS
BC-123SA
POWER SUPPLY CABLES
MOUNTING BRACKETS
BELT CLIPS
ANTENNAS
LC-F1000SS
LC-F1000TS
NC-F1000C
NC-F1000TC
Catalogs / Brochures
Brochures Name | Size |
---|---|
IDAS™ Solutions | 2.43MB |
IDAS™ Digital Simulcast | 1.71MB |
IC-F1100D/IC-F2100D Series | 1.31MB |
IC-F1100D/IC-F2100D Series (without Voice scrambler) | 1.36MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
Instructions | IC-F1100D series, IC-F2100D series |