1 kW LINEAR AMPLIFIER

IC-PW1

Descriptions

Wide frequency coverage with 1 kW output*

All HF bands plus the 50 MHz band are covered. The IC-PW1/ EURO provides a stable, clean and low distortion 1 kW from 1.8 MHz to 50 MHz*. In addition, full duty cycle (even during more demanding RTTY or SSTV operation) and full break-in operation are possible. Great for DX’peditions or contest operation.

*Guaranteed within amateur bands only.

Wide ALC adjustable range

Internal circuitry allows the ALC to be adjusted over a wide range. This means that the IC-PW1/EURO can be used with almost any HF, 6 m or HF/6 m rigs–not only Icom rigs*!

*Ask your dealer about usable exciters.

Compact body

Dimensions, including amplifier, power supply, tuner and controller, are only 350(W) × 269(H) × 378(D) mm*. And, because the controller is detachable, the IC-PW1/EURO can be installed almost anywhere in your shack.

*13.8(W) × 10.6(H) × 14.9(D) in.

Other outstanding features…

  • Output antennas are selectable from exciters (Icom transceivers only), even when the power of the IC-PW1/EURO is off
  • Automatic AC input voltage selector is employed
  • Current (lD), Voltage (VD), temperature, SWR and output power protectors are available
  • Automatic antenna tuner built-in

Specifications

General

Frequency coverage (MHz) 1.800– 1.999 3.500– 3.999
7.000– 7.300 10.100– 10.150
14.000– 14.350 18.068– 18.168
21.000– 21.450 24.890– 24.990*
28.000– 29.700* 50.000– 54.000
* The U.S.A. version can only be used the antenna tuner on the 24–28 MHz bands.
Power supply requirements 180–264 V AC or 90–132 V AC
(single-phase; 50/60 Hz)
Current drain Less than 15 A (max. output at 200 V)
Less than 20 A (max. output at 100 V)
Usable temperature range –10°C to +40°C; +14°F to +104°F
Duty cycle Full duty
Input connector SO-239 × 2 (50 Ω)
Output connector SO-239 × 4 (50 Ω)

Linear Amplifier

Output power

CW, RTTY: 1 kW (180–264 V AC), 500 W (90–132 V AC)

SSB: 1 kW PEP (180–264 V AC),  500 W PEP(90–132 V AC)

Driving power Max. 100 W
Spurious emissions Less than –60 dB (HF bands)
Less than –70 dB (50 MHz)

Antenna Tuner

Output matching range (tuner switch ON)

16.7 Ω to 150 Ω (HF bands)

20.0 Ω to 125 Ω (50 MHz)

Auto tuning accuracy VSWR 1.5:1 or less
Min. required input power 60 W
Insertion loss Less than 1 dB (after tuning)

All stated specifications are subject to change without notice or obligation. 

Supplied Accessories

  • Controller separation cable
  • ACC cables
  • Coaxial cable with PL-259 plugs

POWER AMPLIFIER

  • IC-PW1
    1 kW LINEAR AMPLIFIER

  • OPC-599
    ADAPTER CABLE

Instruction Manual / Guides

Name Model Name Note
INSTRUCTION MANUAL IC-PW1/PW1EURO