Firmware Download

Download the old version

Download Type Firmware
Model name IC-7610
Version Version 1.30
Update Apr.23.2021
Major changes

Changes from Version 1.20

  • [Spectrum scope is improved]
    • -A Scroll mode that can seamlessly change the displayed scope range, depending on the operating frequency, is added.
    • - A popup screen that displays when SPAN or EDGE is selected is added.
    • - The number of FIX EDGE memories is expanded to 4.
    • - The Reference level is independently memorized for each band.
    • - The Reference level of the Center mode scope screen while transmitting is fixed at set level independent of the user’s selection.
    • - The Scope function of the RS-BA1 is improved.
    •     
  • [Other changes]
    • -The transceiver’s settings are now retained after updating the firmware. (not when reverting to an older version)
    • -While operating in the Data mode, the Receive Tone Control is deactivated.
    • -The RS-BA1 Version 2 software will support the IC-7610's Scroll mode from its firmware Version 2.40.

Refer to INFORMATION IC-7610 Version 1.30 for details.

Note

To update the firmware

  • To update from firmware version 1.05 or older to 1.11, the IC-7610 needs to have firmware version 1.06 installed.
  • Thoroughly read Section 6, SD CARD/USB FLASH DRIVE, in the BASIC MANUAL and the Section 13, UPDATING THE FIRMWARE, in the ADVANCED MANUAL, and follow the instructions displayed on the IC-7610 LCD screen.
  • BE SURE to make a backup copy of your data settings to an SD card/USB flash drive before updating the firmware.
  • The firmware will be updated to the following versions.
    • Main CPU: 1.30
    • Sub CPU: 1.05
    • Front CPU:1.01
    • FPGA: 1.06
File Size 7.53MB
File Type zip
Manual manual download page

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of you using this download service and the equipment. You shall comply with applicable laws and regulatory requirements in the use of this download service and in the operation of the equipment.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. and its affiliates expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

You agree not to hold Icom Inc. and its affiliates responsible for any damage to your equipment operation or loss of data, or unauthorized use of the equipment, whether intentional or not, as a result of use this download service.