Descriptions
・Relays Iridium® and GNSS signals, and provides a solution for satellite communications indoors and mobile applications
・Indoor coverage: Maximum 5 m
・RF gain level can be adjusted on the front panel (40 to 50 dB)
・Compact design offers flexible installation: 265 × 55 × 170 (W × H × D, mm), 10.4 × 2.2 × 6.7 (W × H × D, inch)
・Not only satellite PTT (IC-SAT100), but also Iridium® satellite phones and SBD (Short Burst Data) service can be used
・Use supplied coaxial cables (5 m, 16.4 ft for indoor and 10 m, 32.8 ft for outdoor) or user supplied coaxial cables*1
*1 Outdoor cable: 5 dB or less attenuation. Indoor cable: 3 dB or less attenuation.
Specifications
General
Frequency range | 1616.02–1626.48 MHz (Uplink/Downlink) 1575.42–1605.40 MHz (Downlink, GNSS L1 Band) |
---|---|
Antenna impedance | 50 Ω (N-J connector) |
Operating temperature range | –30°C to +60°C, –22°F to +140°F |
Power supply requirement | 13.2/26.4 V DC nominal (10–32 V DC Operating Voltage) |
Current drain (approximate) | Less than 8.0 A (at relay) Less than 2.5 A (stand-by) |
Dimensions (W×H×D) (Projections not included) |
265 × 55 × 170 mm, |
Weight (approximate) | 2.6 kg, 5.7 lb |
Uplink
Total gain | 40–50 dB (1 dB step adjustable) Gain 40 dB at 0 dBm Input Gain 50 dB at –10 dBm Input |
---|---|
Rated output power | +40 dBm |
EVM | Less than 7% |
Spurious emissions | Less than –13.0 dBm |
Downlink
Total gain | 40–50 dB (1 dB step adjustable) at -80 dBm Input |
---|---|
Noise figure | Less than 3.0 dBm |
Spurious emissions | Less than –13.0 dBm |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- OPC-2430, 5 m, 16.4 ft coaxial cables for indoor, 2 pieces
- OPC-2431, 10 m, 32.8 ft coaxial cables for outdoor, 2 pieces
- AH-38, satellite antennas, 4 pieces
- OPC-2426, DC power cable, 1 piece
Optional Accessory
Catalogs / Brochures
Brochures Name | Size |
---|---|
RP-SAT1 | 1.53MB |
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
INSTRUCTIONS | RP-SAT1 |